These 4 pieces of suction anti-slip rug grippers can simply be stuck to the back of a mat. The glue will not remain, and they can be washed repeatedly. And it is easy to take them off.
1. Paste on the surface of the mat to prevent the mat from moving.
2. It can be washed repeatedly and can be washed directly under the paste state.
Material: Adhesive: propylene;
Main material: Polyester Fiber;
Suction surface: propylene resin
1. Please clean the dust on the mat before pasting.
2. Remove the sticker on the back, stick the adhesive surface to the mat, and press it firmly.
3. Before laying the mat, wipe the wet and dirty ground, and press it so that the back of the mat is tightly sucked on the ground.
1. The surface of tatami or carpet cannot be used.
2. Once the adhesive surface is glued, it cannot be removed.
3. Place the mat for a long time, and the absorbing part may stick to the surface. If this happens, please wipe with a wet rag and then remove it.
4. After the mat is removed, the ground may slip, soak a few weakly alkaline washes with a rag and wipe.
5. Do not place near the fire source or high temperature place.
Are you troubled by the problem of carpet slipping? To solve this problem, we have provided a new material that can be used as a non-slip carpet tape. This non-slip rug gripper is made of acrylic resin. When you walk over the surface of the floor mat, it is firmly attached to the ground like countless small suction cups.
ENHANCED NON-SLIP CARPET GRIPPER: 3.9" x 3.9" size, carpet anti-slip tape is suitable for any type and shape of carpet, also can be cut according to your need. Durable and effective rug tape prevents the corner carpet from slipping in the area. And there is no problem when vacuuming the carpet.
REPEATABLE MACHINE WASH:The anti curling rug gripper is less than 1/10 inch thick and is inconspicuous after installation. Ordinary tape can not be used again after being peeled off once. But this anti slip mat tape can be washed and used repeatedly, also can be directly machine-washed under the adhesive state, cost-effective and labor-saving.
EASY TO USE: Just remove the sticker on the back, stick the adhesive surface to the mat, and press it firmly. This non-slip carpet gripper is suitable for all kinds of hard floors such as tile ceramic, linoleum, hardwood, laminate, reinforced composite wood etc.
100% SATISFACTION GUARANTEE: This carpet tape ensures that your rug remains securely in place, and helps to prevent accidental slips and falls. If you are not 100% satisfied, send us a message and we will make a refund. - What are you hesitating? Try the new Rug Grippers now!