Fit Model:: Fits For iRobot Roomba 500 Series Roomba 510, 530, 535, 540, 560, 570, 580, 610 Vacuum Cleaning Robots. To clean the Bristle Brush and Flexible Brush: 1.Turn Roomba over and raise the wire Brush Guard by lifting the two yellow tabs 2.Remove the Bristle Brush and the Flexible Brush. 3.Remove the yellow Brush Bearings from each brush by pulling on them firmly. 4.Remove any hair or debris that may have collected on the bearing shaft. 5.Remove the Brush Caps from each end of the Bristle Brush. Remove any hair or debris that may have collected there. 6.Place the Brush Cleaning Tool over the end of the Bristle Brush and slide it along the length of the brush to remove hair and debris. Remove or cut away any hair wrapped around the Flexible Brush. 7.When the brushes are clean, reinstall the Bearings and Brush Caps. Please note: Do not attempt to run Roomba without Brush Caps or Bearings. Package includes: - 3 x Filters - 3 x 6-armed Side Brush - 2 x Bristle Brush & 2 x Flexible Beater Brush - 2 x Cleaning Tool
The Vacuum Cleaner Replacement Accessories Kit Fits For iRobot Roomba 500 Series Roomba 510, 530, 535, 540, 560, 570, 580, 610 Vacuum Cleaning Robots.
Hepa Filters made of high quality PC, fully use of efficient filter material. Filters maintain Roomba's cleaning performance while reducing infiltration of dust, pollen and other allergens into the air you breathe.
Side brushes are easy to remove and replace as part of routine maintenance?Side Brushes allows your Roomba to reach deeper into the carpet.
To keep your iRobot Roomba operating at peak performance,these filters, rollers and side brushes should be replaced every 2 - 3 months.
What you will get: 1 Brush Cleaning Tools,2 Bristle Brushes,2 Flexible Beater Brushes,3 Side Brushes,3 Filters . And our best service.