1.First part of a 2-part system to level, align, space and hold porcelain tile, marble and stone during installation
2.Use on tiles up to 1/2 in. thick
3.Small holes allow mortar to disperse evenly to eliminate potential voids
How to use:
STEP 1: After spreading your tile adhesive, insert leveling spacer underneath the tiles along the 4 sides, use traditional spacers as you normally would to square up the corners. For larger tiles, it may be necessary to "double up", using 2 leveling spacers for each side.
STEP 2: Set the tile and beat it with a rubber mallet
STEP 3: Use the special traction-adjustable pliers to insert the wedge into the leveling spacers, paying attention not to pass the breakpoint.
STEP 4: Once the tile adhesive has been allowed to set. Remove the leveling spacers with the traction-adjustable pliers, rubber mallet, or kicking them out with your feet.
Coverage - how many to buy ?
6"x24" tiles -100 clips cover up to 25 sqft
6"x36" tiles - 100 clips cover up to 30 sqft
12"x12" tiles -100 clips cover up to 25 sqft
12"x24" tiles -100 clips cover up to 40 sqft
24"x24" tiles -100 clips cover up to 65 sqft
Coverage depend on tile quality and pattern. I am recommending to have 10-20% extra on job site.
Removal must be done after the cement dry, otherwise it is easy to joint and several tiles will appear roughness error.
Color:red ; Space:1mm / 1/32" ; Package:201pcs/bag;include 1pc plier,100pcs wedge and 100pcs clip
Very easy to learn and use at all skill levels.
Installation is twice as fast and Virtually eliminates lippage.
Lippage free, level surface drastically reduces the need for grinding.
Reduces installer fatigue and stress.Prevents tiles from moving while drying.