Drilax 4-3/4" Diamond Hole Saw Glass Cutting Ceramic Porcelain Tile Saw Marble Granite Quartz Circular Drill Bit Tip Wet Drilling Core Grit Coated DIY Renovation Tool 4 3/4 Inches in Drilax010120

Price: $44.99
Product prices and availability are accurate as of 2017-08-19 08:06:21 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Large Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

DRILAX Diamond Hole Saw

Product Features

MONSTER SIZE Diamond Coated Hole Saw Drilling Holesaw Tool 4 3/4" - Smaller Than 5 Inches EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required Cylindrical Shank 3/8" - No Need for Adapters or Arbor

Write a Review