Cal-Flor KI75112 Heavy Duty Flooring Installation Kit for Engineered and Laminate Flooring

Price: $39.99
Product prices and availability are accurate as of 2017-07-23 16:35:30 EDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually ships in 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

This kit is perfect for professionals and do-it-yourselfers. It includes a heavy-duty, tapered, thick pull bar with adjustable-height magnets, a super thick 1"x3"x12" heavy-duty tapping block and 32 -8mm expansion spacers. This kit was created to hold up to many flooring installations with the added benefit of being adaptable for each floating floor job. The Solid Heavy Duty Tapping Block is perfect for installing wood and laminate floors. Simply place against the plank and hit lightly with a hammer, or better yet, use it alone by placing it on the floor and slide-tapping it against the flooring to tighten joints. The Stepped Spacers are used to ensure an equal expansion space around the perimeter of the floating floor during installation. These double-sided, spacers are adjustable to allow for wider or narrower expansion gaps. Use individually or in combination to maintain 1/8" to 3/4" expansion space during installation. These will keep the floor straight even if the wall is not. Hint: most walls are not straight enough for the tolerances required by flooring. Our Adjustable Professional Pull Bar - Works by using 3 magnetic pads in differing combinations to adjust the height of the pull bar to fit most floors from 8mm (5/16") to 20mm (3/4"). This makes it compatible for many different floor thicknesses.

Product Features

A rugged set of tools guaranteed to give years of use to professional and do-it-yourself installers Unique pull bar uses magnets to adjust for various floor thicknesses, from 8mm (5/16") to 20mm (3/4") Double-sided wedge spacers adjust to any sized gap for engineered and laminate floors Solid, super heavy-duty tapping block (not hollow!)

Write a Review